Replacing Blades Salvation 9 and 11 Helicopters

Unlike the Salvation 1 Helicopter it is not essential to remove all parts from the Axle.

Each blade is attached to the Propeller clip by two small screws, one screw on either side of clip. Remove small screws carefully and replace damaged blades. Repeat the same procedure with bottom blades.

 

 

Related Faqs

• Tail and Boom Replacement Procedure Salvation 1, 3 and 9
• Replacing Axle Parts On Salvation 9 Helicopter
• Replacing Blades Salvation 1 and 3 Helicopters
• Battery Replacement Procedure Salvation 1, 3 and 9 Helicopter
• Motor Replacement Procedure Salvation 1 , 3 and 9 Helicopter