Handset has no power (LED light does not flash at all) even when new batteries are installed!

NOTE: Ensure ‘External Trim 1' is at the lowest position at all times at beginning of all flights.   If all batteries in handset are new and positioned correctly please refer to the following steps to correct ‘Internal Trim' until solid light appears on handset.

 

 

Refer to Instruction Manual for diagram of handset

-Ensure ‘External Trim' (Trim 1) is at lowest position

-Remove black cap on handset (Trim Cover) to get to the internal trims. This is located next to ‘The Salvation Logo' on the lower section of handset.

-Turn handset ‘ON/OFF' to ‘ON' position

-Arm handset as normal (push throttle forward and back)

-Turn the 'FAR LEFT INTERNAL TRIM' 1mm clockwise/anti-clockwise.

-Do not turn too much this may damage motor.

-Turn handset ‘OFF' and restart.

-If this fails, repeat process until solid light appears (again only 1mm clockwise/anti-clockwise adjustments)

 

Related Faqs

• Helicopter keeps cutting out while in flight!
• Light on handset keeps flashing
• Can I use rechargeable batteries in the radio controller?
• Can we send the helicopter for repair or service?