Helicopter keeps spinning to one side after replacing damaged blades.

When replacing the bottom blade, please refer to our self help videos on the following link www.bladeztoyz.co.uk Please ensure there is a ‘1mm gap' between the lower rotor and the gear cog (tongue and grove joint). If you have altered the internal trims trying to fix this problem you will need to re-adjust them. Note:  Do not totally detach link between gear cog and bottom blade, these parts need to spin jointly.

 

1mm gap between gear cog and blade piece. Note:  Do not totally detach link between gear cog and bottom blade, these parts need to spin jointly. 

 

Related Faqs

• How many helicopters can be flown at the same time?
• How long is the flight time of The Salvation Helicopter supposed to last?
• The helicopter will not fly forward or back.
• My helicopter will not fly!
• Helicopter will only fly for 5mins after fully charged!
• Helicopter vibrates during flight!
• I cannot control the spinning of Salvation 3 even after adjusting external trims.
• The back tail motor is not spinning.
• I cannot control the spinning even after adjusting external/internal trims.
• Helicopter keeps spinning to one side - left or right!
• Can we send the helicopter for repair or service?