Helicopter keeps spinning to one side after replacing damaged blades

When replacing the bottom blade, please refer to our self help videos on the following link www.bladeztoyz.co.uk Please ensure there is a ‘1mm gap' between the lower rotor and the gear cog (tongue and grove joint). Note: Do not totally detach link between gear cog and bottom blade, these parts need to spin jointly.

 

1mm gap between gear cog and blade piece.

Note: Do not totally detach link between gear cog and bottom blade, these parts need to spin jointly.

Related Faqs

• Salvation 3 back tail motor is not spinning
• How long is the flight time of The Salvation 3 Helicopter supposed to last?
• My helicopter will not fly!
• Helicopter vibrates during flight!
• Helicopter will only fly for 1 min after fully charged!
• I cannot control the spinning of Salvation 3 even after adjusting external trims.